Underground Transmission Line Design
August 18-19, 2022 | Online :: Central Time
The design of underground transmission lines is a complex process that has different challenges than overhead transmission. This course delves into the processes and information used to design underground lines and provides a strong foundation for continued learning in underground transmission. As an attendee, you will receive an in-depth overview of underground system design, technology, construction, and installation. This is the ideal course for engineers new to underground transmission projects needing an in-depth look at the specific design tools and information required and used in the successful design of underground lines.
- Review the steps and process in line routing
- Consider the types of information needed from surveys and geotechnical
- Expand on the information needed to establish alignment with clearances, vaults and duct bank connections
- List the criteria and considerations in cable pulling
- Review the civil design components of underground transmission
- Review options for attaching lines to bridges when necessary
- Discuss the components and details needed for ampacity calculations
- Describe the types and calculations for bonding design and SVL sizing
- Assess the methods and applications for trenchless design
- Expand on the types, differences, and applications of tests for commissioning a line
- Review the benefits and necessities of optimizing civil and electrical design coordination
- Discuss specification development and critical items to capture for a successful procurement phase
- List ways to reduce risk in contracting work, contractor communication and review, and during construction
Thursday, August 18, 2022 : Central Time
8:45 – 9:00 a.m.
Log In and Welcome
12:00 – 12:30 p.m.
9:00 a.m. – 5:00 p.m.
Survey and Geotech
- Types of survey
- SUE and various levels
- Geotech important considerations
- Utility clearance
- Vault placements
- Duct Bank connections
- Duct bank design
- Installation methods and potential challenges
- Splice Vault design
- CymCAP demo
- Cable construction
- Conductor types
- Limitations of CymCap
- Non-standard installations
- Understanding the calculation results
Coordinated Electrical and Civil Design
- Impacts on one another
- Optimized civil + Electrical design
- Field change flexibility
- Electrical considerations (EMF, induced voltage, impedance, charging current)
Friday, August 19, 2022 : Central Time
8:45 – 9:00 a.m.
Log In and Welcome
12:00 – 12:30 p.m.
9:00 a.m. – 5:00 p.m.
- Input criteria
- Considerations and nomenclature
- Demo in Pull Planner
Bonding Design and SVL Sizing
- Bonding types pros/cons
- Calculations for sheath voltage rise
- Calculated voltage and arrester sizing
- Ampacity impacts
- Facility/feature being crossed
- TB 770
- Specification development and critical items to capture
- Manufacturer testing and qualification
- Cable Cut lengths
- Transportation logistics
- Types of tests
- Recommendations new cable vs tie into old
- Different tests for different cable types
- AIS vs GIS terminations vs transition structure install
Risk Management/Best Practices
- Contracting strategies
- Contractor qualifications
- Construction inspection
- Managing contract seams
Nathan M. Rochel, PE, Project Engineer, Technical Manager, Burns & McDonnell
Mr. Rochel is an electrical engineer specializing in the design of underground transmission lines and technical management of the underground & submarine cables department. He has been involved in the design of underground transmission projects ranging from 5-kV through 500-kV. His experience includes all aspects of underground transmission design, including project development, routing, and feasibility, through detailed design, construction support, commissioning, and testing. Mr. Rochel’s experience in types of projects range from IOU transmission installations, developer interconnects, renewable installations (solar, wind, offshore wind), inside station connections, industrial installations, trenchless installations, generation ties, and others.
Nathan D. Scott, PE, Associate Project Engineer, Burns & McDonnell
Mr. Scott is an associate project engineer with over 17 years of transmission and distribution engineering experience. His primary responsibilities include project management, scope definition, project estimating, site evaluation, route analysis, feasibility studies, detailed design and engineering, cable sizing ampacity calculations, pulling calculations, construction drawings and specifications, and construction sequencing. Mr. Scott also has experience in both procurement and construction support, including field inspection during both civil installation as well as cable and accessory installation. In addition, he provides support for public involvement activities, including attending Open Houses. Mr. Scott has also served as an expert witness.
Kevin M. Riegel, PE, Associate Project Engineer, Burns & McDonnell
Mr. Riegel is a associate project engineer at Burns and McDonnell. His duties include providing civil engineering support as well as a lead transmission engineer for the planning and design of high voltage underground transmission lines. Mr. Riegel began his career as a civil engineer in January, 2003. Prior to employment with Burns & McDonnell, Mr. Riegel was employed as a civil engineer in Kansas City, MO as a design engineer for formwork, shoring, and scaffolding for various projects in the Midwest.
Tyler R. McArthur, PE, ENV SP, Associate Civil Engineer, Burns & McDonnell
Tyler is a civil/structural engineer in the underground transmission group at Burns & McDonnell. His responsibilities include duct bank design, underground routing analysis, cable pulling tension calculations, duct bank construction estimates, and underground transmission line construction support. His work includes use of cable pull 3D design/analysis software packages and several in-house design and cost estimating programs. Besides working in the underground transmission group, Tyler has experience working in both the overhead transmission group and substation group. His design and field experience in these departments include foundation design, overhead transmission line modeling, oil containment design, stub angle retrofit design, reviewing tower fabrication drawings, and onsite drilled shaft inspection. His work includes use of PLS CADD software packages along with multiple structural software programs.
Jonathan E. Busby, PE, Associate Technical Consultant, Burns & McDonnell
Jonathan is an electrical engineer specializing in the design of underground transmission lines and electrical power substations. Jonathan has been involved in the design of underground transmission projects ranging from 15-kV through 500-kV and substation projects ranging from 12-kV through 500-kV. His responsibilities include major equipment specification, cable ampacity calculations, physical design, grounding design, one-line diagram, equipment layout, relay and control schematics and wiring diagram, and coordination with contractors, material suppliers and clients.
Branako “Kerby” Primm, PE, Project Manager, Burns & McDonnell
Branako “Kerby” Primm is a project manager who excels at developing client relationships and delivering trenchless feasibility and detailed designs for their projects by combining his engineering and construction experience. Kerby has built existing and potential clients’ trust and confidence by delivering results and exceeding expectations. Kerby has spent over 17 years as an engineer involved in multiple specialties including civil site design, transportation, and trenchless design in the energy sector. Kerby attended the University of Arkansas majoring in Civil Engineering prior to graduating from Kennesaw State University (Southern Polytechnic State Univ.) with a degree in Civil Engineering. He is a Professional Engineer with licenses in 10 states. Kerby has spent the past 8 years within the trenchless sector implementing HDD and DPI technology on a multitude of crossings of USACE Levees, major water bodies, rail and highways. Kerby knows there are great opportunities in the application of trenchless technology with the development of offshore wind farms, water/sewer outfalls, and intake.
We will be using Microsoft Teams to facilitate your participation in the upcoming event. You do not need to have an existing Teams account in order to participate in the broadcast – the course will play in your browser and you will have the option of using a microphone to speak with the room and ask questions, or type any questions in via the chat window and our on-site representative will relay your question to the instructor.
- IMPORTANT NOTE: After November 30 you will not be able to join a Teams meeting using Internet Explorer 11. Microsoft recommends downloading and installing the Teams app if possible. You may also use the Edge browser or Chrome.
- You will receive a meeting invitation will include a link to join the meeting.
- Separate meeting invitations will be sent for the morning and afternoon sessions of the course.
- You will need to join the appropriate meeting at the appropriate time.
- If you are using a microphone, please ensure that it is muted until such time as you need to ask a question.
- The remote meeting connection will be open approximately 30 minutes before the start of the course. We encourage you to connect as early as possible in case you experience any unforeseen problems.
Please Note: This event is being conducted entirely online. All attendees will connect and attend from their computer, one connection per purchase. For details please see our FAQ
If you are unable to attend at the scheduled date and time, we make recordings available to all registrants for three business days after the event
REGISTER NOW FOR THIS EVENT:
Underground Transmission Line Design
August 18-19, 2022 | Online
|Individual attendee(s) - $ 1295.00 each|
Volume pricing also available
Individual attendee tickets can be mixed with ticket packs for complete flexibility
|Pack of 5 attendees - $ 5,180.00 (20% discount)|
|Pack of 10 attendees - $ 9,065.00 (30% discount)|
|Pack of 20 attendees - $ 15,540.00 (40% discount)|
Your registration may be transferred to a member of your organization up to 24 hours in advance of the event. Cancellations must be received on or before July 14, 2022 in order to be refunded and will be subject to a US $195.00 processing fee per registrant. No refunds will be made after this date. Cancellations received after this date will create a credit of the tuition (less processing fee) good toward any other EUCI event. This credit will be good for six months from the cancellation date. In the event of non-attendance, all registration fees will be forfeited. In case of conference cancellation, EUCIs liability is limited to refund of the event registration fee only. For more information regarding administrative policies, such as complaints and refunds, please contact our offices at 303-770-8800
EUCI is accredited by the International Accreditors for Continuing Education and Training (IACET) and offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. IACET is recognized internationally as a standard development organization and accrediting body that promotes quality of continuing education and training.
EUCI is authorized by IACET to offer 1.5 CEUs for this event
Requirements for Successful Completion of Program
Participants must log in each day and be in attendance for the entirety of the course to be eligible for continuing education credit.
Case studies, PowerPoint presentations, and group discussion will be used in this event.
Upon successful completion of this event, program participants interested in receiving CPE credits will receive a certificate of completion.
Course CPE Credits: 18.0
There is no prerequisite for this Course.
Program field of study: Specialized Knowledge
Program Level: Basic
Delivery Method: Group Internet Based
Advanced Preparation: None
EUCI is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its web site: www.nasbaregistry.org