Substation design is a multidiscipline undertaking. The skills are learned from experience and take many years to perfect. The demand for experienced substation engineers is increasing. This combined with the aging and retiring of experienced substation engineers has made it vital for young and new substation engineers to become familiar with the fundamental aspects of design and construction.
This course is an introduction to substation design. The basic building block subjects are presented as an introductory overview. Information and examples are drawn from real world experience. Practical aspects will be emphasized and lessons learned from previous projects will be presented.
A comprehensive introduction to the following substation components will be discussed:
- Bus configurations
- Electrical equipment
- Clearances and bus design
- Civil engineering interface
- Lightning protection
- Substation grounding
- Cable and raceway
- AC and DC systems
- Control and protection
- Control buildings
EUCI has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET). In obtaining this accreditation, EUCI has demonstrated that it complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of their Authorized Provider status, EUCI is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.
EUCI is authorized by IACET to offer 1.1 CEUs for this event.
Requirements for Successful Completion of Program
Participants must sign in/out each day, be in attendance for the entirety of the course to be eligible for continuing education credit.
Case studies, PowerPoint presentations, and group discussion will be used in this event.
Monday, May 21, 2018
7:30 – 8:00 a.m. :: Registration and Continental Breakfast
8:00 a.m. – 5:00 p.m. :: Course Timing
12:00 – 1:00 p.m. :: Group Luncheon
Introduction to Substations
- This session covers why substations are necessary. It describes substation types, uses, and locations. Reasons for substations and the decisions and drivers for substations will be explained. Substation systems are described, and the drawing package based on systems is introduced.
- The different high voltage bus configurations are explained in one-line format. The different configurations are examined based on reliability and cost. Further overview of typical advantages associated with each configuration will be discussed.
- Different types of high voltage electrical equipment are shown and described. The ability to recognize the equipment allows the student to inspect substation installations, with one-line diagrams, and identify function. Further explanation is given of the functional differences between types equipment and discussion on properties affecting equipment quality.
Clearances and Spacings
- Electrical clearances, dangerous fault currents and unusual electrical forces are unique to substation installations. This session familiarizes the engineer with substation specific design criteria. This lesson covers how substations are physically configured to maintain adequate distance between energized parts.
- Wind, weight and magnetic forces can be extremely high during an electric disturbance. The substation buswork must be adequate to handle these requirements. The basics of bus design are described.
Civil/Electrical Engineering Interface
- Substations use foundations, steel structures and have grading and drainage. These are placed, with high voltage electrical equipment, into a very dangerous small area. Interface between electrical and civil disciplines is vital to provide a safe, reliable and cost-effective design. This session familiarizes civil engineers with substation specific requirements. It also covers information electrical engineers need to know about civil structures and foundations.
- Lightning strikes are often the leading cause of power outages. Designing the substation to mitigate direct strikes is discussed.
- Electrical systems use the earth as a current path. Substations must be designed for personnel safety during short circuit to earth conditions. History of substation grounding is discussed and practical methods of grounding design using modern computers are presented.
Cable and Raceway
- Low voltage power, control, and instrumentation cables all interconnect the substation electrical equipment and the essential service control building. Cable types and composition are presented. The method of routing these cables is also described.
Tuesday, May 22, 2018
7:30 – 8:00 a.m. :: Continental Breakfast
8:00 a.m. – 12:00 p.m. :: Course Timing
Control and Protection
- Controlling the electrical equipment and shutting down the high voltage electric system rapidly during a critical event is a fundamental portion of substation design. The relaying equipment and the systems used for this task are complex and involved. This session introduces the basic terminology and methodology used in control and protection design.
AC and DC Systems
- Low voltage AC powers electrical equipment and control building services. Low voltage DC provides emergency power for control and protection schemes and critical systems during power outages. How these systems are managed and designed is discussed.
- Control buildings contain the control, protection, and essential services for the substation. Different types of buildings are presented.
Metering, SCADA and Automation
- Metering, SCADA, and automation are all detailed topics. This session introduces the fundamental definitions and uses of each with some examples of basic implementation.
Richard W. Childress, P. E.
Senior Substation Engineer, Leidos
Mr. Childress received a BS in electrical engineering from the University of Colorado in 1984 and a masters of engineering in 1986. He is a Power Delivery Engineer with over thirty years of experience.
He has successfully designed and constructed substation and transmission line projects for a variety of different clients throughout the world. His forte is supervision of multidiscipline project teams for Engineer, Procure and Construct (EPC) substation projects. His technical abilities include outdoor electrical design, control and relaying design, quality supervision, specification reviews and construction supervision. He is considered an expert in the field of substation design and is an engineering instructor. Mr. Childress is currently working for Leidos as a senior substation engineer.
Hyatt Regency Indianapolis
One South Capitol Avenue
Indianapolis, IN 46204
To reserve your room, please call 1-317-632-1234
Please indicate that you are with the EUCI group to receive the group rate.
The room rate is $179.00 single or double plus applicable taxes.
Room Block Dates:
A room block has been reserved for the nights of May 20 – 22, 2018.
Rate Available Until:
Make your reservations prior to April 29, 2018. There are a limited number of rooms available at the conference rate. Please make your reservations early.
Please Note: Confirmed speakers do not need to register and are encouraged to participate in all sessions of the event. If you are a speaker and have any questions please contact our offices at 1.303.770.8800
|Event||Early Bird Before |
Friday, May 04, 2018
|Introduction to Substation Design||US $ 1195.00||US $ 1395.00|
Register 3 Send 4th Free!
Any organization wishing to send multiple attendees to these conferences may send 1 FREE for every 3 delegates registered. Please note that all registrations must be made at the same time to qualify.
Your registration may be transferred to a member of your organization up to 24 hours in advance of the event. Cancellations must be received on or before April 20, 2018 in order to be refunded and will be subject to a US $195.00 processing fee per registrant. No refunds will be made after this date. Cancellations received after this date will create a credit of the tuition (less processing fee) good toward any other EUCI event. This credit will be good for six months from the cancellation date. In the event of non-attendance, all registration fees will be forfeited. In case of conference cancellation, EUCIs liability is limited to refund of the event registration fee only. For more information regarding administrative policies, such as complaints and refunds, please contact our offices at 303-770-8800
|In Cooperation With|