Serving the energy industry for over 30 years
By - Jon Brown

Introduction to Substation Design
February 24-25, 2021 | Online :: Central Time

Download PDFPrint Event Details

 

Overview

“This course was a perfect next step for an electrical engineer working in the utility sector. Learning about substation design methodology and terminology has provided a baseline and logical next step in building my professional skillset.” Electrical Engineer II, City of Boulder

If this event is of interest you may also be interested in this related event

Substations for Non-Engineers, February 23-24, 2021

Transmission to distribution substation designs vary in complexity, proportional to their rating (MVA) and application. A variety of engineering disciplines are involved including civil, mechanical, electrical power and communications. Design philosophies are influenced by a utility’s contingency strategy, space limitations, aesthetic requirements, work rules, maintenance practices, and other factors.

This course will provide an overview of design methods with given specifications and a one-line diagram for a typical T to D substation. Discussion concerning substation device options provide attendees with the information to make intelligent choices regarding design features. The class creates a forum for comparing best practices for substation design, maintenance, and the operation of these facilities.

Learning Outcomes   

  • Review the various types of substations
  • List substation reliability/redundancy considerations
  • Review substation specifications and one-line diagrams
  • Review site selection criteria and components
  • Determine the keys to initial substation layouts  
  • Get an overview on civil engineering considerations including: concrete foundations, steel structures, and liquid containment
  • Review substation components and ratings including: power transformers, voltage regulators, voltage regulating controls, overcurrent protective devices of fuses and circuit breakers, overvoltage protection  
  • List the purposes, uses for and types of protection & control
  • Get introduced to metal enclosed substations
  • Get introduced to modular substations

Credits

AP_Logo

EUCI has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET).  In obtaining this accreditation, EUCI has demonstrated that it  complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of their Authorized Provider status, EUCI is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.

EUCI is authorized by IACET to offer 1.1 CEUs for this event.

 

Requirements for Successful Completion of Program

You must be logged in for the entire presentation and send in the evaluation after the online course is completed.

Instructional Methods

Case studies, PowerPoint presentations, and group discussion will be used in this event.

Who Should Attend

  • New or moderately experienced substation engineers
  • New power distribution engineers
  • Substation design managers and supervisors

Agenda

Wednesday, February 24, 2021 – Central Time

12:45 – 1:00 p.m. :: Login

1:00 – 5:00 p.m. :: Course Timing


Course Overview   –  Welcome, Introductions & Course Scope                    

  • Types of Substations
    • Course focus on transmission to distribution open frame bus work substations
  • Substation Reliability/Redundancy Considerations
    • Alternative power source for served load
      • Robustness of distribution feeders
      • Redundancy within the substation
    • Review of Substation Specifications
      • One line diagram

Site Selection                                                                                                   

  • Meets the Estimated Required Area
  • Access to Transmission Line
  • Access to Transportation
    • Roads, railroad, barge, etc.
  • Elevation – Proximity to Flood Plane
  • Proximity to Ocean (Salt Water)
  • Soil Conditions

Initial Substation Layout                                                                                  

  • Determine Entry (Primary) and Exits (Secondary)
    • Handling power line congestion
      • Overhead vs. underground
    • Required Clearances Within Substations
      • Per NESC 2017 Sections 10 -19
    • Space Requirements (Vertical/Horizontal)
      • Substation devices (transformers, breakers, etc.)
      • Operation of heavy lifting equipment

Civil Engineering Considerations                                                       

  • Concrete Foundations for Substation Devices
  • Steel Structures Supporting:
    • Bus work
    • Miscellaneous devices (PTs, CTs, Disconnect Switches, Surge Arresters, etc.)
  • Liquid Containment

Thursday, February 25, 2021 – Central Time

8:45 –9:00 a.m. :: Login

9:00 a.m. – 5:00 p.m. :: Course Timing

12:30 – 1:15 p.m. :: Lunch Break


Substation Components and Rating

  • Power Transformer (3) Design Considerations                                             
    • Rating (ONAN, ONAF……)
    • With/without load tap changer
    • Winding configurations
    • Dielectric fluids
  • Voltage Regulators
    • Bus vs. discreet feeder regulation
    • Voltage regulator ratings
  • Voltage Regulating Controls for LTC & VRs
    • Settings & features
  • Overcurrent Protective Devices
    • Fuses
      • Power fuses
      • Current limiting fuses
    • Power circuit breakers
      • Design considerations:
        • Interrupting medium
          • Oil, air, SF6, vacuum
        • Dielectric medium
          • Oil, air, SF6, solid dielectric
        • Driving mechanisms
          • Hydraulic
          • Motor operators
          • Magnetic actuators
        • Maintenance requirements
      • Automatic circuit reclosers
      • Ratings
    • Overvoltage Protection  
      • Coordination of arresters w/equipment insulation ratings
      • Station & heavy-duty class arresters

Protection & Control                                                                                                    

  • Station Power
    • Aux power
      • Station batteries vs. control cabinet batteries
    • Sensors
      • PTs and CTs
    • Metering
      • Protective relay
        • Overcurrent protection (phase & ground)
      • Differential relaying
        • Transformer
        • Substation
      • Remote/Supervisory Control
        • Communication protocols within intelligent devices
        • Gateway computers
      • Control Houses

Intro to Metal Enclosed Substation                                                                 

  • Where Space is at a Premium
    • No exposed bus work
    • Rack out breakers

Intro to Modular Substations                                                                          

  • Small KVA Requirements
  • Delivered as a Complete Unit 

Instructors

Anthony Centore, PE, Director of Engineering Services, Pike Engineering

Tony holds a BS in Electrical Engineering from the University of Pittsburgh School of Engineering, a BS in Physics from California University of Pennsylvania, an MBA from Robert Morris College, and is a registered professional engineer in multiple states. His 30-year career spans the power space that includes large power transformer design and manufacturing, heavy industry, large melting furnaces controls and power systems to include static var compensation, utility generation station power systems and controls, and utility substation and transmission design.


Jerry Josken, Senior Consultant, Pike Engineering

Jerry holds a BS in Electrical Engineering Technology from the Milwaukee School of Engineering and a MBA from North Central College.  During his 30+ year career with Eaton’s Cooper Power Systems Jerry served in a variety of engineering capacities.   Past leadership positions include Chair of IEEE Rural Electric Power Conference (2012) and GLEMS Distribution Equipment /Controls (2013-2014). Presently, Jerry coordinates Pike Engineering Professional Development Programs.

Online Delivery

We will be using Microsoft Teams to facilitate your participation in the upcoming event. You do not need to have an existing Teams account in order to participate in the broadcast – the course will play in your browser and you will have the option of using a microphone to speak with the room and ask questions, or type any questions in via the chat window and our on-site representative will relay your question to the instructor.

  • You will receive a meeting invitation will include a link to join the meeting.
  • Separate meeting invitations will be sent for the morning and afternoon sessions of the course.
    • You will need to join the appropriate meeting at the appropriate time.
  • If you are using a microphone, please ensure that it is muted until such time as you need to ask a question.
  • The remote meeting connection will be open approximately 30 minutes before the start of the course. We encourage you to connect as early as possible in case you experience any unforeseen problems.

Register

Please Note: This event is being conducted entirely online. All attendees will connect and attend from their computer, one connection per purchase. For details please see our FAQ

If you are unable to attend at the scheduled date and time, we make recordings available to all registrants for three business days after the event

Event Standard RateAttendees
Single Connection - Introduction to Substation DesignUS $ 1195.00
Pack of 5 connectionsUS $ 4,780.00
Pack of 10 ConnectionsUS $ 8,365.00
Pack of 20 ConnectionsUS $ 14,340.00
Call us at 303.770.8800 if you have any specific questions on the volume discounts
* all other discounts do not apply to license packs

This event has the following related events:

Substations for Non-EngineersUS $ 1195.00
Pack of 5 connectionsUS $ 4,780.00
Pack of 10 ConnectionsUS $ 8,365.00
Pack of 20 ConnectionsUS $ 14,340.00

By registering I indicate I agree with EUCI's privacy policy and understand I may receive emailed reports, articles, event invitations and other information related to products and services from EUCI and any of our business partners. I understand I may unsubscribe at any time by clicking the link included in emails.

Take advantage of these discounts!

  • Attend the Course and Substations for Non-Engineers and pay US $ 2,195.00 per attendee (save US $ 195.00 each)

Cancellation Policy

Your registration may be transferred to a member of your organization up to 24 hours in advance of the event. Cancellations must be received on or before January 22, 2021 in order to be refunded and will be subject to a US $195.00 processing fee per registrant. No refunds will be made after this date. Cancellations received after this date will create a credit of the tuition (less processing fee) good toward any other EUCI event. This credit will be good for six months from the cancellation date. In the event of non-attendance, all registration fees will be forfeited. In case of conference cancellation, EUCIs liability is limited to refund of the event registration fee only. For more information regarding administrative policies, such as complaints and refunds, please contact our offices at 303-770-8800

By clicking Accept or closing this message, you consent to our cookies on this device in accordance with our cookie policy unless you have disabled them. more information

By clicking Accept or closing this message, you consent to our cookies on this device in accordance with our cookie policy unless you have disabled them. You can change your cookie settings at any time but parts of our site will not function correctly without them. We use cookies during the registration process and to remember member settings.

Close