If this course is of interest you may also be interested in Pipelines 102: Part 192 Regulatory Requirements for Natural Gas Pipelines. Attend both courses and receive a discounted attendee rate!
This is an introductory course to pipelines. The history of pipelines, definitions and terminology, and how pipelines work will be included in the discussion on the first morning. The focus will then move to natural gas and crude oil pipelines from the planning, design, and construction to the operation, safety, and maintenance of the pipelines.
The intent of this course is that participants will be able to apply the information learned when they return to their jobs. The instructors all have years of experience in pipelines. This course will also allow support staff to better understand and effectively interface with their business development, engineering, marketing and operating colleagues.
- Compare the major differences in the types of pipelines
- Verbalize the vernacular related to pipeline terms of design, construction and operation
- Summarize how pipelines work
- Describe the route selection process
- Articulate the right of way acquisition process
- Recognize the types of pipeline equipment
- Explain the types of pipeline facilities
- Review the requirements for proper maintenance activities
- Discuss safety practices that need to be put in place
- Describe SCADA
- Demonstrate familiarity with the major codes and standards as well as pipeline regulatory agencies
EUCI has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET). In obtaining this accreditation, EUCI has demonstrated that it complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of their Authorized Provider status, EUCI is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.
EUCI is authorized by IACET to offer 1.5 CEUs for this event.
Requirements for Successful Completion of Program
Participants must sign in/out each day and be in attendance for the entirety of the course to be eligible for continuing education credit.
PowerPoint presentations and discussion will be used in this course.
Tuesday, January 30, 2018
8:00 – 8:30 a.m. :: Registration and Continental Breakfast
8:30 a.m. – 5:00 p.m. :: Course Timing
12:00 – 1:00 p.m. :: Group Luncheon
History of Pipelines
Pipeline Definitions and Distinguishing Differences
- Crude oil pipelines
- Natural gas pipelines
- Refined product pipelines
- Petrochemical and NGL pipelines
- Gathering lines
- Distribution lines
- Water, sewer and other types of pipelines
How Do Pipelines Work?
- Physics of fluid flow
- Friction losses
- Pipe lengths
- Elevation gain/losses
- Flow rates
- Hydraulic properties of hydrocarbon fluids
Basic Pipeline Design Requirements
- Design factors and class locations
- Pipeline sizing
- Road and water body crossings
- Terrain considerations
- Permitting requirements
Introduction to Pipeline Facility Engineering, Design, and Construction
- Route selection and route survey
- Traditional and emerging methods
- Right-of-way/easement negotiations
- Pipeline construction (Pictorial Display)
- Other pre-construction actions
Pipeline Equipment and Facilities
- Pipeline equipment
- Mainline valves
- Pig launchers
- Pig receivers
- Pipeline facilities
- Meter stations
- Pump stations
- Compressor stations
- Separation and dehydration
- Processing equipment
Wednesday, January 31, 2018
8:00 – 8:30 a.m. :: Continental Breakfast
8:30 a.m. – 5:00 p.m. :: Course Timing
12:00 – 1:00 p.m. :: Group Luncheon
Pipeline Maintenance and Safety
- Operations and maintenance activities
- Cathodic protection (natural gas and liquid)
- Leak survey (natural gas)
- Patrolling (natural gas and liquid)
- Continuing surveillance (natural gas)
- Breakout tanks (liquid)
- Regulator stations (natural gas)
- Pump stations (liquid)
- Compressor stations (natural gas)
- Valve maintenance (natural gas and liquid)
- Line markers & signs (natural gas and liquids)
- Fences and station security (natural gas and liquid)
- Smart pigging (natural gas and liquid)
- Integrity management-IMP (natural gas and liquid)
- Distribution integrity management-DIMP (natural gas)
- Odorization (natural gas)
- Pipeline repair and reconditioning (natural gas and liquid)
- Welding (natural gas and liquid)
- Plastic pipe (natural gas and liquid)
- Control room management (natural gas and liquid)
- Gathering line operation & maintenance (natural gas and liquid)
- Other DOT required tasks
- Safety practices
- Communication with public, other utilities, county & local governments
- Codes & regulatory standards
- PHMSA regulations
- Integrity management
- Operator driven
Introduction to SCADA, Communication, and Controls
- Basic vocabulary
- Overview of the control scheme
Introduction to Pipeline Regulation
- Environmental permitting
- US Army Corps of Engineers
- US Fish and Wildlife Service
- Migratory Bird Treaty Act
- National Historic Preservation Act – Section 106 compliance
- Pipelines on Tribal lands
- Federal land management agencies (BLM, USFS, BOR)
- NEPA compliance
- Introduction to the FERC process and compliance
- State regulations
- Environmental compliance during construction
Q & A, Course Assessment, and Adjournment
Thomas Lael, formerly with ConocoPhillips Pipeline Company
Mr. Lael has been involved with the pipeline industry for over 45 years. He has worked for various State Pipeline Regulatory agencies (Illinois, Connecticut, and California) and the Federal government (Transportation Safety Institute, now known as Training and Qualification’s (T&Q)). More recently Mr. Lael has worked for major petroleum pipeline operators as a code compliance officer, and Operator Qualifications Administrator. He has been responsible for determining the operator’s compliance with Federal and State pipeline safety regulations and determining the intent of current and proposed PHMSA regulations.
Mr. Lael spent ten years working with ConocoPhillips as the OQ administrator for the company OQ program. His employment with ConocoPhillips evolved from his initial employment with Tosco Corporation starting in 1999, merged into Phillips Pipeline Company in 2001 and finally into ConocoPhillips in 2002. He was responsible for the OQ qualifications for approximately 950 employees and over 1,500 contract individuals.
Mr. Lael has worked as an expert witness on legal cases concerning pipeline safety and accident/incident investigations. Mr. Lael has investigated numerous natural gas and petroleum pipeline explosion and fires.
Don McCoy, formerly with PHMSA’s Office of Pipeline Safety
Don is a native of Georgia and a graduate of Georgia Tech with a bachelor’s degree in aerospace engineering. After several years in the aerospace industry, Don changed careers to the natural gas industry and pipeline safety, including regulatory stints with the Georgia Public Service Commission and the U.S. Department of Transportation’s Pipeline & Hazardous Materials Safety Administration – Office of Pipeline Safety. Don’s pipeline industry experience included 40+ years at Oklahoma-based companies Mustang Fuel Corporation, Enogex Inc., Chesapeake Energy, Chesapeake Midstream, and Access Midstream.
Royal Sonesta Houston
2222 West Loop S
Houston, TX 77027
To reserve your room, please call 1-855-463-3091
Please use Group Code 0129EUCI to receive the group rate.
The room rate is $169.00 single or double single or double plus applicable taxes.
Room Block Dates:
A room block has been reserved for the nights of January 31 – February 1, 2018.
Rate Available Until:
Make your reservations prior to January 8, 2018. There are a limited number of rooms available at the conference rate. Please make your reservations early.